| Customization: | Available |
|---|---|
| After-sales Service: | All Life |
| Warranty: | One Year or 1200running Hrs Whichever Comes First |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Advanced Gas Treatment System
1. Filtration Unit and Storage Facility: Typically, customers already possess these components during their treatment engineering process.
2. DesulfurizationDesulfurization Apparatus
Gas Quality Requirements
1.The gas must be free of suspended water or any other suspended substances.
2. The gas's calorific value should be ≥5000kcal/l. If below this threshold (calorific value <5000kcal/l), the gas generator set's output will decrease accordingly.
3.The sulfur content must be less than or equal to 250mg/m³. If the gas contains an excess of sulfur, the sulfur content must be reduced.
Important Note: A high sulfur content can cause severe damage to engine components, emphasizing the need for proper gas management.
| Model | Voltage (V) | Frequency(Hz) | Power(kW) | Speed (r/min) | Dimension(mm) | Weight (kg) |
| AP4DG-30N5LC | 400 | 50 | 30 | 1500 | 1900×720×920 | 1000 |
| AP4DG-50N5LC | 400 | 50 | 50 | 1500 | 1900×720×920 | 1020 |
| AP4GG-60N5LC | 400 | 50 | 60 | 1500 | 1900×720×930 | 1100 |
| AP6GG-80N5LC | 400 | 50 | 80 | 1500 | 2400×980×1450 | 1200 |
| AP6GG-100N5LC | 400 | 50 | 100 | 1500 | 2400×980×1450 | 1250 |
| AP6MKG-150N5LC | 400 | 50 | 150 | 1500 | 2900×1030×1780 | 2500 |
| AP6MKG-180N5LC | 400 | 50 | 180 | 1500 | 2900×1030×1780 | 2500 |
| AP6KG-200N5LC | 400 | 50 | 200 | 1500 | 3100×1300×1780 | 3200 |
| AP6KG-250N5LC | 400 | 50 | 250 | 1500 | 3100×1300×1780 | 3200 |
| AP6TG-300N5LC | 400 | 50 | 300 | 1500 | 3200×1400×1800 | 3800 |
| AP6TDG-350N5LC | 400 | 50 | 350 | 1500 | 3270×1850×2150 | 5500 |
| AP6TFG-500N5LC | 400 | 50 | 500 | 1500 | 3600×1500×2100 | 7400 |
| AP6CG-500N5LC | 400 | 50 | 500 | 1500 | 4110×1633×2110 | 8890 |
| AP6CG-600N5LC | 400 | 50 | 600 | 1500 | 4110×1630×2110 | 8890 |
| AP12VTDG-700N5LC | 400 | 50 | 700 | 1500 | 3850×1950×2370 | 8490 |
| AP12VTDG-700N5HC | 10500 | 50 | 700 | 1500 | 4415×2000×2370 | 9735 |
| AP12VTDG-800N5LC | 400 | 50 | 800 | 1500 | 3850×1950×2370 | 8490 |
| AP12VTDG-800N5HC | 10500 | 50 | 800 | 1500 | 4415×2000×2370 | 9735 |
| AP12VCG-1000N5LC | 400 | 50 | 1000 | 1000 | 5190×2110×2660 | 16000 |
| AP12VCG-1000N5HC | 10500 | 50 | 1000 | 1000 | 5480×2110×2690 | 17000 |
| AP16VTDG-1100N5LC | 400 | 50 | 1100 | 1500 | 4620×1990×2280 | 11700 |
| AP16VTDG-1100N5HC | 10500 | 50 | 1100 | 1500 | 5480×1990×2280 | 13750 |
| AP16VCG-1500N5LC | 400 | 50 | 1500 | 1000 | 6030×2090×2745 | 22500 |
| AP16VCG-1500N5HC | 10500 | 50 | 1500 | 1000 | 6030×2090×2645 | 22610 |
| AP16VCG-2000N5LC | 400 | 50 | 2000 | 1500 | 8420×2055×2890 | 24800 |
| AP16VCG-2000N5HC | 10500 | 50 | 2000 | 1500 | 8835×2055×2890 | 25500 |
| Manufacturer of control panel | Smartgen brand HGM6120U |
| Main function |
2.Acrylic screen, improved wearable and scratch resistance property; 3.Silica-gel panel and keys can well adapt to higher and lower temperature; 4.With RS485 communication port, can achieve "three remote" functions via MODBUS protocol; 5.Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system; 6.Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens; 7.Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency and over current; 8.Precision measure and display of parameters about engine, 9.Control protection: Automatic start/stop of genset, load transfer(ATS control) and perfect failure display and protection; 10.With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output; 11.Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use programmable interface (or PS485 interface) to adjust them via PC.; 12.Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user; 13.Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected; 14.Power supply range: (8~35)VDC, accommodating to different starting battery volts; 15.All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability; 16.Add rubber gasket between shell and controller screen, the waterproof can reach IP55; 17.Controller is fixed by metal fixing clips; 18.Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation. |
| ATS | Chinese brand together with generator |
Discover the Unmatched Advantages of Our High-Performance Single Fuel Gas Gen Sets: A Testament to Weifang Smart Power Generating Equipment Co., Ltd.'s Commitment to Excellence's products within the same area:
1,Our gas gen sets are equipped with precision-engineered Hall Effect Sensors and a cutting-edge high-energy ignition system, ensuring reliable ignition and effortless starting.
2,Leveraging the innovation of American technology paired with the superior expertise of British technology ensures our gen sets deliver unmatched reliability in operation.
3,Our gen sets effortlessly synchronize to run in parallel and integrate seamlessly into a web, enhancing total capacity while simplifying maintenance and minimizing operational downtime. So it will no influence the production of the customer.
4,Designed with low engine rated power, our gen sets guarantee enhanced reliability in operation, ensuring consistent performance.
5,The gen sets' spare parts are widely compatible with original diesel engine components, streamlining maintenance processes. The spark plug's price is remarkably cost-effective at2 USD per piece, keeping overall operating costs impressively low.
6,These gen sets offer outstanding economic performance, with significantly reduced running costs.
7,Benefiting from gas fuel utilization, our gen sets experience minimal carbon build-up, reducing cylinder liner and valve seat wear and extending equipment longevity. This can extend the life of the gen sets, ensuring long-term reliability.
8,Utilizing a sophisticated high-function control panel, our gen sets provide comprehensive multi-protection, enhancing operational safety.
){kind=link}