| Customization: | Available |
|---|---|
| After-sales Service: | All Life |
| Warranty: | One Year or 1200running Hrs Whichever Comes First |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Gas Treatment Device
1. Filtering Device and Storage Canister: These essential components are typically owned by our customers when they embark on any gas treatment engineering projects.
2.Desulfurization Device
Requirements for the Gas
1.The gas must be impeccably free from floating water or any dissociative substances to ensure optimal performance.
2. The gas's thermal value must be a robust ≥5000 kcal/l. Should this thermal value fall below the stipulated 5000 kcal/l, there will be a noticeable decrease in the power output of the gas generator sets.
3.The sulfur content must be meticulously controlled and must not exceed a threshold of 250 mg/m³. Should the gas contain higher sulfur levels, a comprehensive desulfurization process becomes imperative.
Note: Excessive sulfur content poses a significant risk, potentially causing severe damage to critical engine components.
| Model | Voltage (V) | Frequency(Hz) | Power(kW) | Speed (r/min) | Dimension(mm) | Weight (kg) |
| AP4DG-30N5LC | 400 | 50 | 30 | 1500 | 1900×720×920 | 1000 |
| AP4DG-50N5LC | 400 | 50 | 50 | 1500 | 1900×720×920 | 1020 |
| AP4GG-60N5LC | 400 | 50 | 60 | 1500 | 1900×720×930 | 1100 |
| AP6GG-80N5LC | 400 | 50 | 80 | 1500 | 2400×980×1450 | 1200 |
| AP6GG-100N5LC | 400 | 50 | 100 | 1500 | 2400×980×1450 | 1250 |
| AP6MKG-150N5LC | 400 | 50 | 150 | 1500 | 2900×1030×1780 | 2500 |
| AP6MKG-180N5LC | 400 | 50 | 180 | 1500 | 2900×1030×1780 | 2500 |
| AP6KG-200N5LC | 400 | 50 | 200 | 1500 | 3100×1300×1780 | 3200 |
| AP6KG-250N5LC | 400 | 50 | 250 | 1500 | 3100×1300×1780 | 3200 |
| AP6TG-300N5LC | 400 | 50 | 300 | 1500 | 3200×1400×1800 | 3800 |
| AP6TDG-350N5LC | 400 | 50 | 350 | 1500 | 3270×1850×2150 | 5500 |
| AP6TFG-500N5LC | 400 | 50 | 500 | 1500 | 3600×1500×2100 | 7400 |
| AP6CG-500N5LC | 400 | 50 | 500 | 1500 | 4110×1633×2110 | 8890 |
| AP6CG-600N5LC | 400 | 50 | 600 | 1500 | 4110×1630×2110 | 8890 |
| AP12VTDG-700N5LC | 400 | 50 | 700 | 1500 | 3850×1950×2370 | 8490 |
| AP12VTDG-700N5HC | 10500 | 50 | 700 | 1500 | 4415×2000×2370 | 9735 |
| AP12VTDG-800N5LC | 400 | 50 | 800 | 1500 | 3850×1950×2370 | 8490 |
| AP12VTDG-800N5HC | 10500 | 50 | 800 | 1500 | 4415×2000×2370 | 9735 |
| AP12VCG-1000N5LC | 400 | 50 | 1000 | 1000 | 5190×2110×2660 | 16000 |
| AP12VCG-1000N5HC | 10500 | 50 | 1000 | 1000 | 5480×2110×2690 | 17000 |
| AP16VTDG-1100N5LC | 400 | 50 | 1100 | 1500 | 4620×1990×2280 | 11700 |
| AP16VTDG-1100N5HC | 10500 | 50 | 1100 | 1500 | 5480×1990×2280 | 13750 |
| AP16VCG-1500N5LC | 400 | 50 | 1500 | 1000 | 6030×2090×2745 | 22500 |
| AP16VCG-1500N5HC | 10500 | 50 | 1500 | 1000 | 6030×2090×2645 | 22610 |
| AP16VCG-2000N5LC | 400 | 50 | 2000 | 1500 | 8420×2055×2890 | 24800 |
| AP16VCG-2000N5HC | 10500 | 50 | 2000 | 1500 | 8835×2055×2890 | 25500 |
| Manufacturer of control panel | Smartgen brand HGM6120U |
| Main function |
2.Acrylic screen, improved wearable and scratch resistance property; 3.Silica-gel panel and keys can well adapt to higher and lower temperature; 4.With RS485 communication port, can achieve "three remote" functions via MODBUS protocol; 5.Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system; 6.Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens; 7.Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency and over current; 8.Precision measure and display of parameters about engine, 9.Control protection: Automatic start/stop of genset, load transfer(ATS control) and perfect failure display and protection; 10.With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output; 11.Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use programmable interface (or PS485 interface) to adjust them via PC.; 12.Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user; 13.Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected; 14.Power supply range: (8~35)VDC, accommodating to different starting battery volts; 15.All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability; 16.Add rubber gasket between shell and controller screen, the waterproof can reach IP55; 17.Controller is fixed by metal fixing clips; 18.Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation. |
| ATS | Chinese brand together with generator |
Delve into the Exceptional Benefits of Our Single Fuel Gas Gen Sets, Surpassing Industry StandardsUnveil the ways our products surpasscompetitors in the same market:
1,Outfitted with a state-of-the-art Hall Effect Sensor and a high-energy ignition system to guarantee impeccable ignition and seamless start-up.
2,Featuring American-made electric governors technology and UK-engineered gas regulation systems technology for superior operational reliability.
3,Our gen sets enable parallel multi-set operations and seamless integration into web systems, thereby enhancing total capacity and streamlining maintenance, ensuring continuous production for customers. Such engineering guarantees no disruption in your production process.
4,With engines optimized for reduced rated power, we significantly boost engine durability and dependability.
5,The spare parts are largely compatible with original diesel engines, simplifying maintenance with ease. The spark plug's cost is an economical2 USD per piece, effectively lowering overall operational expenses.
6,These generators deliver outstanding economic efficiency, characterized by minimal operational costs.
7,Benefiting from the use of gas fuel, this leads to reduced carbon build-up, thereby decreasing wear on cylinder liners and gas valve seats. This greatly extends the lifespan of our gen sets.
8,Utilizing a sophisticated control panel, these gen sets are equipped with numerous protection features to maximize operational safety.
){kind=link}